• Butik 48 26 34 87
  • Billig fragt fra 39,- kr.
  • Værksted 48 20 15 45
  • Min Konto

Back to Top

Cisco SFP - 10/100/1000 Ethernet BaseT Multir

Zoom

ONS-SE-ZE-EL=/CISCO

Ikke på lager - Måske udgået - RING 48 26 34 87 for Info

(Sidst opdateret: d. 10-03-2018 kl. 09:46)

3.415,95 DKK

Hurtigt overblik

Cisco SFP - 10/100/1000 Ethernet BaseT Multirate Copper RJ-45, 1000 Mbit/s, Kabel, 100m, 4068349t, 1W, -10 - 85 °C

Detaljer

SFP Module
The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA).

A schematic of the SFP transceiver module functional block diagram is illustrated in Figure 2. It contains three parts: the transmitter, receiver, and Electrically Erasable Programmable Read-Only Memory (EEPROM) storage chip. This block diagram is intended for information purposes only and does not illustrate design requirements.

Transmitter
In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit.

Receiver
In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal.

EEPROM
This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.

Cisco SFP - 10/100/1000 Ethernet BaseT Multirate Copper RJ-45. Dataoverførselshastighed (maks.): 1000 Mbit/s. Forbindelsesteknologi: Kabel. Maksimal overførselsafstand: 100m, Tid mellem fejl (MTBF): 4068349t. Strømforbrug (normal): 1W. Kabelteknologi: 10/100/1000 Ethernet BaseT, Grænseflade: SFP, Overholdelse af branchestandarder: IEEE-802.3

Dataoverførselshastighed (maks.)1000 Mbit/s

Specifikationer

Netværk
Dataoverførselshastighed (maks.)1000 Mbit/s
Ports & interfaces
ForbindelsesteknologiKabel
Præstation
Maksimal overførselsafstand100m
Middeltid mellem fejl4068349t
Plug and play
Strømstyring
Strømforbrug1W
Miljømæssige betingelser
Operationel temperatur-10 - 85 °C
Andre funktioner
Kablingsteknologi10/100/1000 Ethernet BaseT
InterfaceSFP
StikRJ-45 STP Cat5e & Cat6
Overholdelse af branchestandarderIEEE-802.3

Copyright: ajdata.dk a/s - 2014     Alle priser er inkl. moms . Der tages forbehold for prisændringer, trykfejl og udgåede varer